For in vitro laboratory research use only. This article explains analytical chemistry terms. It makes no claims about the effects of any material.
A peptide is a chain of amino acids joined by peptide bonds. A linear chain has two ends: the N-terminus, which carries a free amino group (–NH2), and the C-terminus, which carries a free carboxylic acid (–COOH). Many synthetic peptides are made with one or both ends changed. The two most common changes are N-terminal acetylation and C-terminal amidation. This guide explains what each one is, how it is written in a sequence, how much it changes the mass, and how it shows up in HPLC and LC-MS results.
What N-terminal acetylation is
N-terminal acetylation replaces one hydrogen on the N-terminal amino group with an acetyl group (CH3CO–). The free amine becomes an amide, sometimes described as an “acetyl cap.”
- Formula change: the chain gains C2H2O.
- Mass change: about +42.011 Da monoisotopic (+42.04 Da average).
- Charge change: a free N-terminal amine is usually positively charged at neutral and acidic pH. An acetylated N-terminus carries no charge.
In solid-phase synthesis, acetylation is usually done as a last step on the resin: after the final amino acid is added and its protecting group removed, the free amine is reacted with an acetylating reagent such as acetic anhydride. Our guide to solid-phase peptide synthesis explains the steps around it.
What C-terminal amidation is
C-terminal amidation replaces the –OH of the C-terminal carboxylic acid with –NH2, so the end becomes a carboxamide (–CONH2). A peptide with this end is often called an “amidated peptide” or a “peptide amide.”
- Formula change: the chain loses O and gains NH, a net change of −O +NH.
- Mass change: about −0.984 Da (monoisotopic and average are nearly the same).
- Charge change: a free C-terminal carboxyl is usually negatively charged at neutral pH. An amidated C-terminus carries no charge.
In solid-phase synthesis, the C-terminal end is usually decided by the resin, not by a separate reaction. Some resins (for example, Wang or 2-chlorotrityl resins) release the chain as a free acid, while amide-forming resins (for example, Rink amide resin) release it as a C-terminal amide.
How the end groups are written
The end groups are shown with short prefixes and suffixes. Our guide to peptide sequence notation covers the rest of the notation.
| Form | Example notation | N-terminus | C-terminus | Mass change vs free form (monoisotopic) |
|---|---|---|---|---|
| Free (unmodified) | H-Gly-Ala-Ser-OH | Free amine (H-) | Free acid (-OH) | 0 |
| N-terminal acetyl | Ac-Gly-Ala-Ser-OH | Acetyl (Ac-) | Free acid (-OH) | +42.011 Da |
| C-terminal amide | H-Gly-Ala-Ser-NH2 | Free amine (H-) | Amide (-NH2) | −0.984 Da |
| Both ends capped | Ac-Gly-Ala-Ser-NH2 | Acetyl (Ac-) | Amide (-NH2) | +41.027 Da |
Some sequences leave out H- and -OH, so a sequence with no end symbols is usually read as the free form. Specifications may also spell it out, for example “C-terminal amide” or “N-acetyl.” A sequence written in one-letter codes may show the same changes as “Ac-” at the start and “-NH2” or “-amide” at the end.
Acetylated peptide vs acetate salt
The two words look alike but mean different things:
- An acetylated peptide has an acetyl group covalently bonded to the chain. It is part of the molecule, it is written in the sequence as Ac-, and it adds about 42.01 Da to the molecular weight.
- An acetate salt is a peptide paired with acetate counter-ions, which sit next to positively charged groups but are not bonded into the chain. The counter-ion is not part of the sequence and is not counted in the molecular weight of the peptide itself.
A peptide can be acetylated, an acetate salt, both or neither. Our guide to peptide counter-ions explains salt forms.
How end groups change charge and pI
Each free end usually carries a charge, so capping an end changes the net charge of the chain:
- Acetylation removes the positive charge at the N-terminus. The net charge shifts down, and the isoelectric point (pI) usually goes down.
- Amidation removes the negative charge at the C-terminus. The net charge shifts up, and the pI usually goes up.
- Capping both ends removes both terminal charges, so the net charge comes only from the side chains.
Our guide to peptide isoelectric point explains how charge and pI are calculated.
How end groups show up in reversed-phase HPLC
In reversed-phase HPLC, retention depends on how hydrophobic the peptide is and on its charge in the mobile phase. Changing an end group can move the peak:
- Acetylation removes a positive charge and adds a small nonpolar methyl group, so an acetylated peptide often elutes somewhat later than the same sequence with a free N-terminus.
- Amidation often makes a smaller difference in a typical low-pH, TFA-containing mobile phase, because the C-terminal carboxyl is already mostly uncharged at that pH. The size and direction of the shift depend on the sequence and the method.
Because the forms can elute close together, a free-acid or non-acetylated version can show up as a separate small peak near the main peak. Our guides to reading an HPLC chromatogram and peptide hydrophobicity explain retention time.
How end groups show up in LC-MS
Mass spectrometry measures mass, so it is the usual way to confirm which end groups are present. The two changes behave very differently:
- Acetylation (+42.011 Da) is a large, easy-to-see shift. A peptide missing its acetyl group appears about 42 Da lighter than expected.
- Amidation (−0.984 Da) is a small shift. A free-acid form of an amidated peptide appears about 0.98 Da heavier, which is close to the spacing between isotope peaks (a carbon-13 atom adds about 1.003 Da). Telling them apart takes enough mass resolution, or a check of the isotope pattern.
The same 0.98 Da difference also appears with deamidation, where an asparagine or glutamine side chain converts to an acid. An intact mass alone can’t show where the change is. Tandem mass spectrometry (MS/MS) can, because the mass difference stays with the pieces that contain the C-terminus (y ions) if it comes from the end group. Our guides to peptide molecular weight, peptide impurities and peptide sequencing methods explain these terms.
A blocked N-terminus also matters for Edman sequencing, which needs a free N-terminal amine. An acetylated peptide can’t be read by Edman degradation without first removing the block.
End groups and related impurities
End groups connect to several common synthesis by-products:
- Wrong C-terminal form. A free-acid version of an amidated peptide, or the reverse, about 0.98 Da apart.
- Missing acetyl group. A non-acetylated version of an acetylated peptide, about 42.01 Da lighter.
- Acetyl-capped truncations. Some synthesis methods deliberately acetylate chains that failed to couple, so short capped sequences can appear as impurities with an Ac- end.
A certificate of analysis doesn’t usually report end groups as a separate result. It reports the tests run on the sample, such as purity and identity. A certificate reports results for the sample tested. It is not a guarantee for other lots.
A worked example: mass shifts on one sequence
Here is an example with made-up numbers, not a real product. Take the made-up pentapeptide Ala-Ser-Leu-Phe-Gly (ASLFG) in its four end-group forms.
| Form | Formula | Monoisotopic mass | [M+H]+ |
|---|---|---|---|
| H-ASLFG-OH (free) | C23H35N5O7 | 493.254 Da | m/z 494.261 |
| Ac-ASLFG-OH | C25H37N5O8 | 535.264 Da | m/z 536.272 |
| H-ASLFG-NH2 | C23H36N6O6 | 492.270 Da | m/z 493.277 |
| Ac-ASLFG-NH2 | C25H38N6O7 | 534.280 Da | m/z 535.288 |
- Acetylation adds 535.264 − 493.254 = 42.010 Da (42.011 before rounding).
- Amidation changes the mass by 492.270 − 493.254 = −0.984 Da.
- Capping both ends adds 534.280 − 493.254 = 41.026 Da (41.027 before rounding).
- If the amidated form (m/z 493.277) were expected, a free-acid by-product would appear at m/z 494.261. The amidated form’s own carbon-13 isotope peak sits at about m/z 494.280, only about 0.02 apart, which is why resolution matters for this pair.
Frequently asked questions
What is C-terminal amidation?
It is the replacement of the C-terminal –OH with –NH2, giving a carboxamide end. It is written as -NH2 at the end of a sequence and changes the mass by about −0.984 Da.
What is N-terminal acetylation?
It is the addition of an acetyl group (CH3CO–) to the N-terminal amino group. It is written as Ac- at the start of a sequence and adds about 42.011 Da.
What does “amidated peptide” mean?
It means the peptide ends in a C-terminal amide (–CONH2) instead of a free carboxylic acid (–COOH).
Is an acetylated peptide the same as a peptide acetate?
No. Acetylation is a covalent change to the chain. An acetate is a counter-ion paired with the peptide in a salt form and is not part of the sequence.
How do acetylation and amidation change charge?
Acetylation removes the positive charge of the free N-terminus. Amidation removes the negative charge of the free C-terminus.
Does a certificate of analysis report end groups?
Not usually as a separate result. A certificate lists the tests run on the sample, such as HPLC-UV purity and LC-MS identity. Check which tests a certificate lists.
Peptix certificates
Each Peptix peptide lot with a published certificate has a third-party Certificate of Analysis showing the lot number, HPLC-UV purity and LC-MS identity. Where a certificate reports net content, the measured amount is printed on that certificate. A certificate reports results for the sample tested, so match the lot number on your order to its certificate. To get the certificate for your lot, contact us with the lot number.
For research use only. Not for human or animal use.