Amino Acid Analysis of Peptides: How It Works and What It Shows on a COA

For in vitro laboratory research use only. This article explains an analytical method. It makes no claims about the effects of any material.

Amino acid analysis (AAA) is one of the oldest methods in peptide and protein chemistry, and it is still widely used. It breaks a peptide down into its individual amino acids, then identifies and counts them. This guide explains how amino acid analysis works step by step, which amino acids are hard to measure, and how the result connects to net peptide content on a certificate of analysis.

What amino acid analysis measures

A peptide is a chain of amino acids joined by peptide bonds. Amino acid analysis answers two questions about a sample:

  • Composition: which amino acids are present, and in what ratios to each other.
  • Quantity: how much of each amino acid is in the sample, usually in nanomoles.

From those two results, a lab can check whether the composition matches the expected sequence and work out how much peptide is in the weighed sample.

Step 1: Hydrolysis

First, the peptide bonds are broken so that every amino acid is released as a free molecule. The classic method is acid hydrolysis: the sample is heated in 6 M hydrochloric acid, typically at about 110 °C for around 24 hours, in a sealed tube with the air removed. Small additives such as phenol are often included to limit side reactions. Some labs use vapor-phase hydrolysis, where the acid reaches the sample as a vapor, to reduce background contamination.

Step 2: Separation and detection

Next, the free amino acids are separated and detected. Most amino acids don’t absorb much UV light, so they are usually reacted with a reagent that makes them easy to detect. There are two main approaches:

  • Post-column derivatization. The amino acids are separated by ion-exchange chromatography, then mixed with a reagent such as ninhydrin, which forms a colored product measured by a visible-light detector. This is the approach used by dedicated amino acid analyzers.
  • Pre-column derivatization. The amino acids are tagged first, for example with OPA, FMOC-Cl, PITC or AQC, then separated by reversed-phase HPLC with UV or fluorescence detection.

Some labs instead use LC-MS, which can measure amino acids with or without a tagging step. Whatever the approach, each amino acid appears as its own peak at a known position on the chromatogram.

Step 3: Quantitation

Each peak is measured against a standard mixture containing known amounts of each amino acid. An internal standard, commonly norleucine (an amino acid not normally found in peptides), is often added to the sample to correct for losses during handling. The result is a table of amino acids with the amount of each one found.

Known limits of acid hydrolysis

Acid hydrolysis doesn’t affect every amino acid equally. The main exceptions are well known:

  • Tryptophan is largely destroyed by standard acid hydrolysis. Labs that need it use a different hydrolysis method.
  • Cysteine is partly destroyed. It is often converted first by an oxidation step (to cysteic acid) so it can be measured reliably.
  • Asparagine and glutamine are converted to aspartic acid and glutamic acid. They are reported together with those acids as Asx and Glx.
  • Serine and threonine are partly lost over time, so some labs correct for this.
  • Bonds between valine and isoleucine break slowly, so those amino acids can read low after a standard run.
  • Methionine can oxidize during handling.

For these reasons, amino acid analysis results are usually judged on the amino acids that recover well, rather than on every residue.

A worked example

Here is an example with made-up numbers, not a real product. Suppose a peptide is expected to contain glycine, alanine, leucine and phenylalanine in a 2 : 1 : 1 : 1 ratio. The analysis finds:

Amino acid Expected ratio Found (nmol) Found ratio
Glycine 2 19.8 1.98
Alanine 1 10.1 1.01
Leucine 1 9.9 0.99
Phenylalanine 1 10.0 1.00

The found ratios are close to the expected ones, so the composition is consistent with the expected sequence. Those amounts also show about 10.0 nmol of peptide in the sample. If the peptide has a molecular weight of 600 g/mol, that is 10.0 nmol × 600 g/mol = 6.0 µg of peptide. If the weighed sample was 8.0 µg, the net peptide content is 6.0 ÷ 8.0 = 75%.

Amino acid analysis and net peptide content

That last calculation is why amino acid analysis is a common way to measure net peptide content. A freeze-dried peptide powder also contains water and counter-ions, which add weight but contain no amino acids. Amino acid analysis counts only the peptide, so it shows how much of the powder’s weight is peptide. Our guide to net peptide content vs purity explains why that number differs from HPLC purity, and our explainer on TFA vs acetate peptide salts covers where counter-ions come from. Nitrogen (elemental) analysis is another method labs use for the same purpose.

What amino acid analysis can’t show

  • Sequence order. Two peptides with the same amino acids in a different order give the same result. Order is checked by other methods, such as tandem mass spectrometry or Edman sequencing.
  • Identity on its own. The mass of the intact molecule is checked by LC-MS. See LC-MS identity explained.
  • Purity. Related impurities, such as a chain missing one amino acid, give almost the same composition. Purity is measured by HPLC-UV. See HPLC purity explained.

Frequently asked questions

What is amino acid analysis?

It is a method that breaks a peptide or protein into its amino acids, then identifies and measures each one. It shows composition and quantity.

Is amino acid analysis done by HPLC?

Often, yes. After hydrolysis, the amino acids are usually separated by HPLC or ion-exchange chromatography. Some labs use LC-MS.

What is the difference between an amino acid analyzer and HPLC?

A dedicated amino acid analyzer typically uses ion-exchange separation with post-column ninhydrin detection. HPLC methods typically tag the amino acids first and separate them by reversed-phase chromatography.

Why is tryptophan often missing from results?

Standard acid hydrolysis destroys most of it, so it needs a separate hydrolysis method to be measured.

Does amino acid analysis confirm a peptide’s sequence?

No. It confirms composition, not order. Sequence order needs methods such as tandem mass spectrometry.

Is amino acid analysis on every certificate?

Not always. Many certificates report HPLC-UV purity and LC-MS identity, and some also report net content. Check which tests a certificate lists. A certificate reports results for the sample tested. It is not a guarantee for other lots. For other terms, see our research peptide glossary.

Peptix certificates

The peptide lots with a published certificate on our peptide COA lookup page each have a third-party Certificate of Analysis showing the lot number, HPLC-UV purity and LC-MS identity. Where a certificate reports net content, the measured amount is printed on that certificate. For example, you can view the BPC-157 10 mg, TB-500 10 mg or BPC-157 / TB-500 20 mg product with its lot certificate, or browse all research peptides.

For research use only. Not for human or animal use.

logo
Research customers only

Peptix sells research materials only to qualified researchers and research institutions, for in vitro laboratory research. Not for human or animal use. By continuing, you confirm you are a researcher or are buying for a research organization, and that you are of legal age to enter a binding contract.